NF-A14x25r G2 PWM 12V 1500RPM 140mm Next Gen Fan € 35.13 New 25 in stock | |
More variations available Show |
Noctua NF-A14x25r G2 PWM 12V 1500RPM 140mm Next Gen Fan
The NF-A14x25r G2’s superior performance, comprehensive feature set, cutting-edge construction and state-of-the-art materials set a new standard within Noctua’s portfolio and make it an elite choice for the most discerning demands.
Features
- 4-pin PWM and Noctua’s AAO (Advanced Acoustic Optimisation)
- Next-generation performance
- Sterrox liquid-crystal polymer compound
- Ultra-tight tip clearance
- Integrated anti-vibration pads
- Six year warranty
Succeeding the award-winning NF-A15 and building on the technological innovations of the ground-breaking NF-A12x25, the NF-A14x25r G2 is Noctua’s next-generation round-frame 140mm flagship model: Made from Sterrox LCP, its highly optimised Progressive-Bend impeller with winglets, Flow Acceleration Channels and Centrifugal Turbulator hub combined with a tip-clearance of only 0.7mm allow the NF-A14x25r G2 to further improve its predecessor’s renowned quiet cooling performance. This makes it not only a perfect fit for Noctua’s next-generation 140mm class heatsinks but also an excellent upgrade for existing cooler models such as the NH-D15(S) or NH-U14S series (Sx2-PP set recommended for push/pull configurations).
The 4-pin PWM version supports fully automatic speed control via PWM fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed from 1500 to 1250rpm. Its ultra low-loss etaPERF motor with Smooth Commutation Drive 2 technology doesn’t only provide unprecedented energy efficiency and running smoothness but thanks to the new SupraTorque feature, it can also leverage extra torque headroom to keep the fan at its desired speed when working against back pressure, thereby ensuring even better performance on heatsinks. Topped off with Noctua’s reference-class SSO2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the NF-A14x25r G2 is a premium-quality product through and through.
Next-generation performance
Noctua’s NF-A15 is renowned as being among the best round-frame 140mm fans on the market and has received more than 100 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the NF-A14x25r G2 represents another step up in performance and manufacturing.
Highly optimised P/Q curve for all applications
The NF-A14x25 G2’s sophisticated aerodynamic design allows for a pressure to airflow (P/Q) curve that is extremely strong in the critical mid-section. This means that the NF-A14x25 G2 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.
Excellent on-application acoustics
While many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the NF-A14x25 G2 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (SPL) when working against back pressure.
Progressive-Bend impeller
The NF-A14x25 G2 features a unique Progressive Bend Impeller with Flow Acceleration Channels and winglets. Its nine blades are swept backwards close to the hub and progressively bent forward further out. Working in tandem with the Centrifugal Turbulator hub, this design not only helps to push more air towards the outer blade areas where efficiency is higher but also assures maximum lift and near uniform loading across the entire blade span.
Centrifugal Turbulator hub
Acting as a turbulator, the new Centrifugal Turbulator hub design improves flow attachment in the hub region. At the same time, it’s centrifugal driving motion pushes air outwards from the hub area where efficiency is low due to the slow rotational speed towards the outer, high-efficiency zones of the blades, thereby increasing overall efficiency by optimising fluid distribution across the impeller area.
Flow Acceleration Channels
The NF-A14x25 G2 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
Winglets
Winglets can help to reduce tip vortices that are caused by the pressure differential between the suction and the pressure side of fan blades but bear the risk of reducing efficiency due to extra fluid displacement in high velocity regions. The NF-A14x25 G2’s small winglets have been carefully fine-tuned to provide consistent efficiency gains working in tandem with its Progressive-Bend blade geometry, Flow Acceleration Channels and AAO frame.
Ultra-tight tip clearance
The NF-A14x25 G2 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.7mm. This highly ambitious design sets a new benchmark for 140mm fans and helps the NF-A14x25 G2 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.
Sterrox liquid-crystal polymer compound
The NF-A14x25 G2’s impeller is made from Noctua’s novel Sterrox liquid-crystal polymer (LCP) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.
AAO frame
Noctua’s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency.
Stepped Inlet Design
Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
Integrated anti-vibration pads
Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and most other mounting mechanisms.
SSO2 bearing
The NF-A14x25 G2 features the further optimised second generation of Noctua’s renowned, time-tested SSO2 bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Metal bearing shell
In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-A14x25 G2 sports a CNC milled bearing shell made entirely from brass.
etaPERF motor with NE-FD6 PWM IC
Noctua’s new etaPERF motor sets new standards in energy efficiency thanks to its extremely low electric impedance and the latest NE-FD6 drive system with its integrated, ultra-sensitive Hall effect sensor that provides super-precise commutation performance. This not only enables it to convert a minimal electric input into a maximum power-output with hardly any losses, but also works in tandem with Noctua’s proven Smooth Commutation Drive 2 technology to make the etaPERF motor run near-inaudible.
SupraTorque
Most fans become slightly slower when working against back pressure such as on heatsinks and radiators, which results in reduced performance. Enabled by the new NA-FD6 driver IC, Noctua’s SupraTorque technology allows the fan to leverage additional torque headroom when required in order to keep its RPM speed at the desired level no matter the airflow resistance, ensuring consistent performance even in the most demanding conditions.
PWM control with wide speed range
The NF-A14x25 G2 PWM can be PWM-controlled from its maximum speed of 1500rpm all the way down to 300rpm. This makes it possible to adjust the fan for maximum performance or near-silent operation using either automatic, temperature-based motherboard speed control or manual controllers such as the NA-FC1.
Stops at 0% PWM
When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.
Smooth Commutation Drive 2
The latest version of Noctua’s advanced Smooth Commutation Drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the fan remarkably quiet even at very close distances.
Low-Noise Adaptor
The NF-A14x25 G2 PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 1500 to 1250rpm. The L.N.A. can be used either to run the fan at a fixed speed of 1250rpm or to cap the maximum speed when using automatic PWM control.
Extensive cabling options
The fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.
Advanced protection features
Protected against reverse polarity, over voltage and over current (short-circuits), the fan is suitable for use in challenging electrical environments. At the same time, its ultra-low EMC emissions make it ideal for applications where electrical interference is critical. Last but not least, its locked rotor and overloading protection add extra safety in situations where the fan may be blocked mechanically.
Safety certifications
Unlike many cheap fans, the NF-A14x25 G2 has been thoroughly tested for electrical safety, immunity and radiated emission. Carrying CE, TÜV, UKCA and UL certifications and meeting all applicable standards (EN 62368-1, EN 55035, EN 55032, UL-507), it is a safe, quality device through and through.
6-year manufacturer’s warranty
Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A14x25 G2 features an MTTF of more than 150,000 hours rating and comes with a full 6-year manufacturer’s warranty.
Specifications | NF-A14x25r G2 PWM |
---|---|
Size | 140x140x25 mm |
Mounting hole spacing | 105x105 mm |
Connector | 4-pin PWM |
Bearing | SSO2 |
Cable length | 20cm + 30cm NA-EC1 extension cable |
Blade Geometry | Progressive-Bend impeller |
Frame Technology | AAO (Advanced Acoustic Optimisation) |
Material | Sterrox LCP |
Rotational Speed (±10%) | 1500 RPM |
Rotational speed with L.N.A. | (±10%) 1250 RPM |
Airflow | 91.5 CFM |
Airflow with L.N.A. | 74.7 CFM |
Acoustical Noise | 24.8 dB(A) |
Acoustical Noise with L.N.A. | 19.7 dB(A) |
Static Pressure | 2.56 mm H2O |
Static Pressure with L.N.A | 1.30 mm H2O |
Max. Input Power | 2.28 W |
Max. Input Current | 0.19 A |
Voltage | 12 V |
Voltage PWM signal | 5 V |
MTBF | 150,000 h |
Contents | NF-A14x25r G2 PWM PPA, NF-A14x25r G2 PWM PPB, 2x NA-RC16 Low-Noise Adaptor (L.N.A.), NA-YC1 4-pin PWM splitter cable, 2x NA-EC1 30cm extension cable, 8x NA-AV2 anti-vibration mounts, Fan screws |
Warranty | 72 months |
EAN barcode | 9010018100648 |
Specifications | NF-A14x25r G2 PWM |
---|---|
Size | 140x140x25 mm |
Mounting hole spacing | 105x105 mm |
Connector | 4-pin PWM |
Bearing | SSO2 |
Cable length | 20cm + 30cm NA-EC1 extension cable |
Blade Geometry | Progressive-Bend impeller |
Frame Technology | AAO (Advanced Acoustic Optimisation) |
Material | Sterrox LCP |
Rotational Speed (±10%) | 1500 RPM |
Rotational speed with L.N.A. | (±10%) 1250 RPM |
Airflow | 91.5 CFM |
Airflow with L.N.A. | 74.7 CFM |
Acoustical Noise | 24.8 dB(A) |
Acoustical Noise with L.N.A. | 19.7 dB(A) |
Static Pressure | 2.56 mm H2O |
Static Pressure with L.N.A | 1.30 mm H2O |
Max. Input Power | 2.28 W |
Max. Input Current | 0.19 A |
Voltage | 12 V |
Voltage PWM signal | 5 V |
MTBF | 150,000 h |
Contents | NF-A14x25r G2 PWM PPA, NF-A14x25r G2 PWM PPB, 2x NA-RC16 Low-Noise Adaptor (L.N.A.), NA-YC1 4-pin PWM splitter cable, 2x NA-EC1 30cm extension cable, 8x NA-AV2 anti-vibration mounts, Fan screws |
Warranty | 72 months |
EAN barcode | 9010018100648 |
Product Resources
FAQ
How do I measure fan size?
The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan’s four sides, NOT the distance between the fan’s screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn’t really dictated by customer preference, but more by recent designs of PC cases.
As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don’t hesitate to get in touch.
If you know the distance between the fan mounting screw holes but don’t know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.
Screw hole spacings and fan sizes
Space Between Screw Holes Fan Size 32mm 40mm 40mm 50mm 50mm 60mm 60mm 70mm 72mm 80mm 83mm 92mm 105mm 120mm I received a small cable (resistor) with my fan; what is it for?
The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.
How can I tell which way the air blows through the fan?
Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.
Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?
Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.
The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.
Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.
Top Quiet Fans
![Noctua NF-A12x25 PWM chromax.black.swap 12V 2000RPM 120mm Fan](/images/products/nf-a12x25-pwm-ch-bk-ssm.png)
Noctua NF-A12x25 PWM chromax.black.swap 12V 2000RPM 120mm Fan
![Noctua NF-F12 iPPC PWM 12V 3000RPM 120mm High Performance Fan](/images/products/nf-f12-ippc-3000-pwmsm.png)
Noctua NF-F12 iPPC PWM 12V 3000RPM 120mm High Performance Fan
![Noctua NF-R8 REDUX 12V 1200RPM 80mm Quiet Case Fan](/images/products/nf-r8-redux-1200sm.png)
Noctua NF-R8 REDUX 12V 1200RPM 80mm Quiet Case Fan
![Noctua NF-A14 iPPC PWM 12V 3000RPM 140mm High Performance Fan](/images/products/nf-a14-ippc-3000-pwmsm.png)
Noctua NF-A14 iPPC PWM 12V 3000RPM 140mm High Performance Fan
![Noctua NF-A9 PWM 12V 2000RPM 92mm Premium Quality Fan](/images/products/nf-a9-pwmsm.png)
Noctua NF-A9 PWM 12V 2000RPM 92mm Premium Quality Fan
![Noctua NF-A8 PWM 12V 2200RPM 80mm Premium Quality Fan](/images/products/nf-a8-pwmsm.png)
Noctua NF-A8 PWM 12V 2200RPM 80mm Premium Quality Fan
![Noctua NF-A14 PWM chromax.black.swap 12V 1500RPM 140mm Fan](/images/products/nf-a14-pwm-ch-bk-ssm.png)
Noctua NF-A14 PWM chromax.black.swap 12V 1500RPM 140mm Fan
![Noctua NF-B9 REDUX 12V 1600RPM 92mm Quiet Case Fan](/images/products/nf-b9-redux-1600sm.png)
Noctua NF-B9 REDUX 12V 1600RPM 92mm Quiet Case Fan
![Noctua NF-R8 REDUX PWM 12V 1800RPM 80mm Quiet Case Fan](/images/products/nf-r8-redux-1800-pwmsm.png)
Noctua NF-R8 REDUX PWM 12V 1800RPM 80mm Quiet Case Fan
![Gelid Silent 6, 60mm Quiet Case Fan](/images/products/gel-silent6sm.png)
Gelid Silent 6, 60mm Quiet Case Fan