RM-850X V2 850W Levitation Bearing Fan, Fully Modular, 80+ Gold PSU Discontinued | |
More variations available Show |
Corsair RM-850X V2 850W Levitation Bearing Fan, Fully Modular, 80+ Gold PSU
CORSAIR RM850x series fully modular power supplies are built with the highest quality components to deliver 80 PLUS Gold efficient power to your PC, with virtually silent operation.
Features
- Massive 850W full modular power supply
- Ten year warranty
- 80 PLUS Gold efficiency
- Zero RPM fan mode at low or medium loads
MAGNETIC LEVITATION COOLING MEETS HIGH EFFICIENCY
CORSAIR RMx Series fully modular power supplies are built with the highest quality components to deliver 80 PLUS Gold efficient power to your PC with the cooling power of potent Magnetic Levitation fans.
135MM MAGNETIC LEVITATION FAN
Utilises a magnetic levitation bearing and custom engineered rotors for high performance, low bearing noise, and superior reliability.
HIGH EFFICIENCY
With upwards of 90% peak efficiency, RMx produces less noise and less heat, which means less time worrying and more time gaming.
FULLY MODULAR WITH MULTIPLE EPS12V CONNECTORS
Completely modular cables means you only connect the cables your system needs, and the wide range of included cables adds broad compatibility with modern graphics cards and motherboards. Also compatible with the 12-pin GPU Power Cable for the hottest new GPUs.
ZERO RPM FAN MODE
At loads of 340W or lower the cooling fan switches off entirely for silent operation, but once the action picks up, the fan activates, ensuring critical component temps stay in check.
TECHNOLOGY AND RELIABILITY
For consistent, reliable power and superb electrical performance, each RMx Series power supply features a robust resonant LLC topology with DC-DC conversion, and 105°C rated 100% Japanese electrolytic capacitors. With precise timings, RMx supports Microsoft Modern Standby, ensuring extremely fast wake-from-sleep times and better low-load efficiency.
CERTIFICATIONS
The Cybernetics organisation measures efficiency and noise levels across the PSU’s entire operational range, using more than 1,450 different load combinations. The “Gold” efficiency rating is defined as ≥87% to <91% (depending on input voltage). The “Standard++” noise level test is measured in those same configurations to be ≥30 dBA & <35 dBA under noise data averaging.
Specifications | RM-850X V2 PSU |
---|---|
SKU | CP-9020200-UK |
ATX12V Version | v2.4 |
Continuous output rated temperature | 50°C |
Continuous power | 850 Watts |
+3.3V maximum output current | 20 A |
+5V maximum output current | 20 A |
+12V maximum output current | 70.8 A |
Voltage | 100–240Vac |
Frequency | 47–63Hz |
ATX-Mainboard (20+4-pin) | Yes (610mm) |
PCI-Express (6+2-pin) | 4, 2 cables (750mm) |
CPU P8/P4 Connector | 3 (650mm) |
SATA Connectors | 14, 4 cables |
Molex Connectors | 4, 1 cable |
Floppy Connectors | 1 (adapter cable) |
Fan bearing technology | Magnetic Levitation Bearing |
Fan size | 135mm |
MTBF | 100,000 hours |
Multi-GPU ready | Yes |
80 Plus Certification | Gold |
Form Factor | ATX |
Cooling | Semi-fanless |
Noise Level | Up to 40% load, 0 dBA |
Noise Level (50% load) | 5 dBA |
Noise Level (max) | 35 dBA |
Modular | Fully |
Cable Type | Sleeved and flat, black cables |
Dimensions | 150mm x 86mm x 160mm (WxHxL) |
EPS12V Version | v2.92 |
Safety and protection | OVP (Over Voltage), UVP (Under Voltage), SCP (Short Circuit), OTP (Over Temp), OPP (Over Power) |
Warranty | 120 months |
EAN barcode | 0840006604808 |
Specifications | RM-850X V2 PSU |
---|---|
SKU | CP-9020200-UK |
ATX12V Version | v2.4 |
Continuous output rated temperature | 50°C |
Continuous power | 850 Watts |
+3.3V maximum output current | 20 A |
+5V maximum output current | 20 A |
+12V maximum output current | 70.8 A |
Voltage | 100–240Vac |
Frequency | 47–63Hz |
ATX-Mainboard (20+4-pin) | Yes (610mm) |
PCI-Express (6+2-pin) | 4, 2 cables (750mm) |
CPU P8/P4 Connector | 3 (650mm) |
SATA Connectors | 14, 4 cables |
Molex Connectors | 4, 1 cable |
Floppy Connectors | 1 (adapter cable) |
Fan bearing technology | Magnetic Levitation Bearing |
Fan size | 135mm |
MTBF | 100,000 hours |
Multi-GPU ready | Yes |
80 Plus Certification | Gold |
Form Factor | ATX |
Cooling | Semi-fanless |
Noise Level | Up to 40% load, 0 dBA |
Noise Level (50% load) | 5 dBA |
Noise Level (max) | 35 dBA |
Modular | Fully |
Cable Type | Sleeved and flat, black cables |
Dimensions | 150mm x 86mm x 160mm (WxHxL) |
EPS12V Version | v2.92 |
Safety and protection | OVP (Over Voltage), UVP (Under Voltage), SCP (Short Circuit), OTP (Over Temp), OPP (Over Power) |
Warranty | 120 months |
EAN barcode | 0840006604808 |
Product Resources
FAQ
Do high wattage power supplies cost more to run?
No - the rated wattage of a power supply refers to the maximum amount of power it can deliver at full load, not how much power it uses. More powerful PSUs will consume around the same amount of power as lower powered power supplies in any given PC system, so your electricity bill will not be higher when using a more powerful power supply!
The best way to reduce your electricity bill when using your PC is to use a more efficient power supply or make your PC consume less power by removing components which are not needed, such as extra drives and expansion cards, or by choosing a cooler-running processor or graphics card.
My brand new power supply doesn’t work! Am I doing something wrong?
It’s possible that the power supply may be faulty, but here are some simple things to check. Firstly, a power supply will not work if you simply plug it in and flick the switch. The power supply will only turn on if you connect it to a working motherboard and associated items (processor, memory, video card, etc). It is actually the motherboard which tells the power supply when to switch on.
Secondly (if applicable), check the voltage is set correctly to 115/230 volts depending on what country you are in. Thirdly, if possible it would be good to try the power supply in another PC to see if it works, or try another power supply in your PC to see if that works. You can then tell whether it is the power supply which is faulty or the actual PC itself. If all else fails, please contact us for further support, and/or return details.
Why should I buy a whole new PSU when I could just replace the noisy fan in my existing one?
Virtually all the noise generated by a PC power supply originates from the cooling fan inside it, so simply replacing the fan with a quiet fan may seem an obvious way to go. However, if you are thinking about attempting this operation, please bear the following points in mind:
- Your existing power supply will be designed to run with a specific amount of airflow in order to adequately cool the components inside and reducing the airflow may lead to overheating and damage to the power supply and/or PC.
- All PC power supplies contain very high voltages and even with the power disconnected, the voltages stored in the capacitors can be easily enough to kill. It is not recommended to take the cover off any PC power supply for this reason unless you are absolutely confident of your own ability. Because of the grave dangers involved, all PC power supplies by law carry a warning label forbidding removal of the power supply case.
- There will be no standard PC fan connector inside the power supply to use to connect a replacement fan, and it would probably have to be soldered directly into the PCB inside the power supply, or have a specialist power connector attached. This can be a tricky operation to say the least.
Please consider the above points very carefully before proceeding with an operation to replace the fan in your existing power supply!
What is PFC (Power Factor Correction)?
If you are interested in being “green” and saving the planet, you might like to read a short explanation of how our power supplies can save energy using Active PFC (Power Factor Correction), not to be confused with Power Conversion Efficiency which is also very good in most of our PSUs. “Power Factor” is a measure of how efficiently electrical power is consumed. Ideally, Power Factor would be 1 (or 100%) and known as unity.
Unfortunately in the real world, Power Factor is reduced by highly inductive loads down to values of 0.7 (70%) or less. This induction is caused by equipment such as small electric motors, fans, fluorescent lighting ballasts and transformers such as those in PSUs. This is bad news for the electricity generating companies who can impose a surcharge on heavy users if they have a consistently low Power Factor, as more electricity has to be produced to make up the shortfall.
Power Factor Correction (PFC) is used in some equipment to minimise the inductive component of the electrical current. This helps to reduce the losses in the electrical supply to that equipment. Power Factor Correction capacitors are normally used to reduce induction in an electrical load, which minimises wasted energy and hence improves the efficiency of a company and reduces electricity costs.
It is not usually practical to reach unity, i.e. Power Factor 1, and it seems that most electricity supply companies accept consumers having a Power Factor as low as 0.94 (94%) without imposing a surcharge. Unfortunately most of the cheap (and not so cheerful) PSUs tend to have a Passive PF as low as 0.75 or 75% which in a large office can lead to a PF surcharge.
However, the good news is that most of Quiet PC’s PSUs implement a system known as Active PFC which involves some clever electronics. This means that their power factor (PF) can be as high as 0.94 or 94% (at full load), while harmful harmonic frequencies are reduced to well below legal requirements. So by using our products, you can be happy in the knowledge that you are doing your bit to save the planet!
How do I know what size of wattage power supply I need?
The best answer we can give to this question is to go ahead and take an intelligent “guesstimate”! There are no hard and fast rules about what size of power supply any given PC needs as a minimum. Our advice would be that if you are replacing an existing power supply, then consider a new one at least of the same wattage as the old one. In addition, if you wish to build in a “safety margin” to allow for reliable running and possible future upgrades, consider adding 100-200 watts to the rating of your existing unit.
If you are building a new PC, most customers now buy a power supply rated in the region of 500-800 watts depending primarily on the performance level of their graphics card(s) and number of drives to be installed. But in any event if you are unsure about which power supply would be best for your PC then please do contact us by phone or email and we will be happy to give you a specific recommendation based on your budget.
My new PSU came with a 24-pin connector but my motherboard needs 20 pins! Do I need an adaptor cable?
We receive many customer enquiries about this. In fact, most of the 24-pin compatible power supplies we sell come with special motherboard connectors which can be converted to 20-pins with no additional conversion cables. All you need to do is look carefully at the connector and you will see that the end four pins can be slid off, turning the connector into a 20-pin compatible one (see below) - easy when you know how!
Image showing how to change a power supply’s 24-pin motherboard connector into a 20-pin connector by unclipping the end four-pin blockWhat do the PSU safety protection abbreviations mean?
There are many possible safety protections a PSU can have. Below is a list of what each abbreviation means. Please note, not all PSUs have all safety protections.
- OCP - Over-Current Protection
- OVP - Over Voltage Protection
- UVP - Under Voltage Protection
- SCP - Short Circuit Protection
- OPP - Over Power Protection
- OTP - Over Temperature Protection
- UL - Underwriters Laboratories, more information.
- TÜV - Technical Inspection Association, more information.
- CE - European Conformity, more information.
- FCC - Federal Communications Commission, more information.
- RoHS - Restriction of Hazardous Substances Directive, more information.
- WEE - Electronic waste, more information.
- 80 PLUS - Promotes energy efficiency for PC power supplies, more information.
- ErP - Energy Related Products, more information.
More information on certification marks can be found here.
Top Quiet Power Supplies
![Seasonic PRIME Fanless 500W 80PLUS Platinum Modular Power Supply](/images/products/ssr-px-500sm.png)
Seasonic PRIME Fanless 500W 80PLUS Platinum Modular Power Supply
![Seasonic PRIME Fanless 700W 80PLUS Titanium Modular Power Supply](/images/products/ssr-prime-fanless-tx-700sm.png)
Seasonic PRIME Fanless 700W 80PLUS Titanium Modular Power Supply
![be quiet Pure Power 12 M 750W 80+ Gold Fully Modular ATX3.0 PSU](/images/products/bq-bn343sm.png)
be quiet Pure Power 12 M 750W 80+ Gold Fully Modular ATX3.0 PSU
![Streacom ST-NANO160 160W nanoPSU and AC/DC adapter block](/images/products/st-nano160sm.png)
Streacom ST-NANO160 160W nanoPSU and AC/DC adapter block
![Streacom ST-ZF240 ZeroFlex 240W Passive PSU](/images/products/st-zf240sm.png)
Streacom ST-ZF240 ZeroFlex 240W Passive PSU
![FSP Dagger Pro 850W SFX ATX3.0 Semi-Fanless Modular PSU](/images/products/fsp-dagger-pro-850-atx3sm.png)
FSP Dagger Pro 850W SFX ATX3.0 Semi-Fanless Modular PSU
![be quiet System Power 10 650W 80Plus Bronze PSU](/images/products/bq-bn328sm.png)
be quiet System Power 10 650W 80Plus Bronze PSU
![Streacom ST-NANO120 120W nanoPSU and AC/DC adapter block](/images/products/st-nano120sm.png)
Streacom ST-NANO120 120W nanoPSU and AC/DC adapter block
![Gelid 24pin Acrylic Cable Holder](/images/products/gel-acrylic-24p-cablesm.png)
Gelid 24pin Acrylic Cable Holder
![FSP VITA GM 750W 80PLUS Gold Fully Modular ATX 3.1 PSU](/images/products/fsp-vita-gm-750wsm.png)
FSP VITA GM 750W 80PLUS Gold Fully Modular ATX 3.1 PSU